I would definitely recomend NOT using any Auto Negotiation between users and
any of your switches as I have experienced problems with this as well.
Another cool command to use is PortHost, which combines PortFast while
turning off EtherChannel and trunking negotiation all at the same time.
Jeff
<[EMAIL PROTECTED]@idt.net> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I have a problem with a Cat. 6509. We are running Ethernet ports are set
to:
> speed: Auto, Duplex: Auto. User's NICs are set (speed/duplex) to auto. A
user
> had reset his NIC, when out of the office to 100/Full. When he connected
to our
> network, the port he was connect to locked(port light was amber) and the
switch
> locked as well. We disconnected him and rebooted the switch. All is fine
>
> His setting causing his port to lock is one thing, but the Cat. should
have
> remained operational. Does anybody have any ideas? The Cat's "SHOW VER" is
below
>
>
> show vers
> WS-C6509 Software, Version NmpSW: 5.2(1)CSX
> Copyright (c) 1995-1999 by Cisco Systems
> NMP S/W compiled on Apr 8 1999, 11:35:52
>
> System Bootstrap Version: 5.2(1)
>
> Hardware Version: 2.0 Model: WS-C6509 Serial #: SCAxxxxxxxxxxxxx
>
> Mod Port Model Serial # Versions
> --- ---- ------------------- ----------- ---------------------------------
-----
> 1 2 WS-X6K-SUP1-2GE SAD03384734 Hw : 5.0
> Fw : 5.2(1)
> Fw1: 5.1(1)CSX
> Sw : 5.2(1)CSX
> Sw1: 5.2(1)CSX
> 2 48 WS-X6248-RJ-45 SAD03401220 Hw : 1.1
> Fw : 4.2(0.24)VAI78
> Sw : 5.2(1)CSX
> 3 48 WS-X6248-RJ-45 SAD03431572 Hw : 1.1
> Fw : 4.2(0.24)VAI78
> Sw : 5.2(1)CSX
> 6 48 WS-X6248-RJ-45 SAD04160E1A Hw : 1.2
> Fw : 5.1(1)CSX
> Sw : 5.2(1)CSX
> 7 48 WS-X6248-RJ-45 SAD035002FS Hw : 1.2
> Fw : 5.1(1)CSX
> Sw : 5.2(1)CSX
>
> DRAM FLASH NVRAM
> Module Total Used Free Total Used Free Total Used Free
> ------ ------- ------- ------- ------- ------- ------- ----- ----- -----
> 1 65408K 17067K 48341K 16384K 3828K 12556K 512K 203K 309K
>
>
> ---------------------------------------------
> This message was sent through IDT.
> http://www.idt.net/
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]