I found this situation doing research on CCO. the example shows two radius
servers then two TACACS+ servers. look at the link for more info.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/secur
_c/scprt1/scathen.htm
Mike
> -----Original Message-----
> From: ItsMe [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, January 18, 2001 8:49 PM
> To: [EMAIL PROTECTED]
> Subject: Re: Tacacs+
>
>
> Are you sure you can configure 2 Tacacs+ servers. I thought
> 1 Tacacs+, and/or 1 Radius and/or local?
>
> "Eric Gunn" <[EMAIL PROTECTED]> wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > If more than 1 tacacs server is defined in a config what
> would happen if
> >
> > The user dosen't authenticate, it will NOT contact the second server
> correct?
> >
> > The only reason to have a second server assigned is if the
> first one is
> not
> > responding, in which case the config would allow for use of
> the second
> server.
> >
> > Also Authentication must take place before anything can happen.
> >
> > I know I some of these questions are basic, I just want to
> verify and see
> > if I am misunderstanding something.
> >
> >
> > Thanks,
> >
> > --Eric
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
> >
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
