If you do a "show ver" won't it just tell you that the switch was power
recycled. It won't tell you specifically what the problem is. I'm not a
guru but isnt' there a way to see if the switch produced some type of errors
that might indicate what the problem is? Like using show stacker or
something like that. Just my 2 cents worth.
-----Original Message-----
From: Tony van Ree [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, January 23, 2001 6:17 PM
To: Jeff; [EMAIL PROTECTED]
Subject: Re: 2900's
Hi Jeff,
Do a "show ver" this will show you why they are rebooting. In a batch that
I had once I got one that did it and it was a bad power supply. I don't
know where you are but in our case these were covered under warranty.
Teunis
Hobart, Tasmania
Australia
On Tuesday, January 23, 2001 at 09:33:19 AM, Jeff wrote:
> I just got some 2924-XL's in and I'm currently configuring them... one
thing
> I notice though is that every so often they automatically reboot! Any
ideas?
>
> Jeff
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
--
www.tasmail.com
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
