Hi,

I think you might find the "sh ver" indicates why it last reset.  This can indicate a 
number of failures that includes power reset, reload and some other hardware failures.

If you have not power cycled the switch and it shows it has been up because of "Last 
reset from power-on" and the time up is less than when you last cycled it it indicates 
a power problem.  Other reset such as "Last reset from reload" and you did not do a 
reload might indicate you have some other failure.

That is my understanding.

Teunis
Hobart, Tasmania 
Australia

Teunis
Hobart, Tasmania
Australia

On Tuesday, January 23, 2001 at 07:02:08 PM, Bolton. Travis wrote:

> If you do a "show ver" won't it just tell you that the switch was power
> recycled.  It won't tell you specifically what the problem is.  I'm not a
> guru but isnt' there a way to see if the switch produced some type of errors
> that might indicate what the problem is?  Like using show stacker or
> something like that.  Just my 2 cents worth.
> 
> -----Original Message-----
> From: Tony van Ree [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, January 23, 2001 6:17 PM
> To: Jeff; [EMAIL PROTECTED]
> Subject: Re: 2900's
> 
> 
> Hi Jeff,
> 
> Do a "show ver" this will show you why they are rebooting.  In a batch that
> I had once I got one that did it and it was a bad power supply.  I don't
> know where you are but in our case these were covered under warranty.
> 
> Teunis
> Hobart, Tasmania
> Australia
> 
> 
> 
> 
> On Tuesday, January 23, 2001 at 09:33:19 AM, Jeff wrote:
> 
> > I just got some 2924-XL's in and I'm currently configuring them... one
> thing
> > I notice though is that every so often they automatically reboot! Any
> ideas?
> > 
> > Jeff
> > 
> > 
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > 
> > 
> 
> 
> --
> www.tasmail.com
> 
> 
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> 
> 


--
www.tasmail.com


_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to