I am trying to remember the best setting on the Pipeline routers to do a Multilink with the Cisco's. I think off memory the best setting was to use MP+ on the Pipeline. The problem is when a Pipeline drops a channel on a 128K link it can drop the part of the multilink bundle that has the IP address. The link stays up on the other channel and never drops therefore you must drop the call and make it again. A similar thing can happen if the link runs close to the 128K for a while. The LCP goes missing down goes the channel and load to 0. It is only with the Pipelines this occurs. Any clues welcome. Teunis Hobart, Tasmania Austalia -- www.tasmail.com _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
