Yes, but on a point-to-point link, so what if you use the network number
and broadcast address to identify the two nodes? If one station sends to
the broadcast address it's not a problem, there's only one other station
anyway! I think /31 should be allowed on point-to-point links.
Priscilla
At 08:22 AM 1/24/01, Jeff McCoy wrote:
>Michael...
>/30 = 4 address (1st is network number, 2 & 3 host ip's, 4th is broadcast
>address)
>/31 = 2 address (1st is network number, 2nd is broadcast address)
> no host ip's...this is not useful..
>/32 = 1 address (1 host address) i use this for loopbacks
>
>
>""Neil Schneider"" <[EMAIL PROTECTED]> wrote in message
>94mool$d33$[EMAIL PROTECTED]">news:94mool$d33$[EMAIL PROTECTED]...
> > AFAIK you can only go as far as /30.
> >
> > Neil Schneider
> >
> > <[EMAIL PROTECTED]> wrote in message
>[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > >
> > >
> > > Hello good guys of the group, can anyone with the knowledge of ip/31,
>help
> > me?
> > > please.
> > >
> > > I need to know what it is use for, and how it works, pls.
> > >
> > > Thanks in advance,
> > >
> > > Michael Taiwo.
> > >
> > > _________________________________
> > > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > >
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
>_________________________________
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
________________________
Priscilla Oppenheimer
http://www.priscilla.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
