Humm...
I remember reading one time that the SupI card's FE ports did not support
ISL or 1.Q trunks or ehterchannle either. Did I remember wrong?
TIA
--
John Hardman CCNP MCSE+I
""louieb"" <[EMAIL PROTECTED]> wrote in message
000201c087a5$7842c810$[EMAIL PROTECTED]">news:000201c087a5$7842c810$[EMAIL PROTECTED]...
> The Sup 1 and 10 meg card will do all you need for the lab. Don't waste
the
> extra bucks on the 100MB card unless you plan on keeping the cat for
> personal use after you pass the lab. When I bought mine, it had a sup I,
24
> port 10MB card, 12 port 100FX card and an ATM LANE module. (Now that they
> have taken LANE off the lab, it looks like a big mistake). I've never used
> the 100 FX module and the ATM module is no longer needed.
>
> Be sure to keep several code release versions around as they tend to use
> older versions of code on the Cat's in the lab.
>
> LAB
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Albert Lu
> Sent: Thursday, January 25, 2001 11:03 PM
> To: GroupStudy
> Subject: Catalyst 5000 for home
>
>
> Hi,
>
> I would like to ask what's the minimum modules I need for a Cat5000 for a
> home lab?
>
> I'm considering a SupI(ws-x5009) and a ws-x5010 (24pt 10meg telco ports)
or
> ws-x5012 (48pt 10meg telco ports).
>
> Is this sufficient for a CCIE lab, the SupI has a 100Meg uplink surely
this
> is enough to to ISL trunking, routing, etc, etc?
>
> Or should I go for a ws-x5213a (12pt 100Meg). This module is much more
> expensive than the other because of the onboard RJ45 and being 100Meg.
>
> Thank you for you advice.
>
>
> Albert
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
