Found it ...
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/np1_c/1cprt1/1cospf.htm#6793
Phil.
--- Phil Barker <[EMAIL PROTECTED]> wrote: >
Hi Group,
> Just been studying OSPF this week and have come
> accross the 'Cost' metric as being 10^8/bandwidth
> bps
> post 11.3 (bandwidth configured on the interface).
>
> My question is : Using the above equation 10 Meg
> Ethernet The Cost is 10 i.e 10^8/10^7.
> It then follows that 100 Mbit Eth The Cost is 1 !!!
>
> So it would follow that the cost of 1 Gig interface
> would be 0.1 ???
>
> I only have 11.2 in my lab currently and the 'ip
> ospf
> cost' parameter is an integer 16 bit value i.e range
> is 1 - 65535.
>
> Has this parameter changed in a later version of IOS
> ?
>
> Checked Cisco but cannot find relevant info.
>
> Regards,
>
> Phil.
>
>
>
____________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.co.uk address at
> http://mail.yahoo.co.uk
> or your free @yahoo.ie address at
> http://mail.yahoo.ie
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
____________________________________________________________
Do You Yahoo!?
Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk
or your free @yahoo.ie address at http://mail.yahoo.ie
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
