You are currently on the ethernet interface, try adding the following command
on both routers:
bridge irb
brigde 1 route ip
Rich
On Jan 30, 6:48pm, [EMAIL PROTECTED] chatted about:
> Subject:DLSW+ question
>
> I am trying to setup two routers with DLSW+ , when I do with routing ,I can'=
> t=20
> ping each other loopback interfaces for some reason.=20
>
>
> Hostname DCE_Router
> dlsw local-peer peer-id 10.1.1.1
> dlsw remote-peer 0 tcp 10.1.1.2
> dlsw bridge-group 1
>
> Loopback0
> =A0 ip address 10.1.1.1 255.255.255.0
>
> interface Ethernet0
> ip address 150.1.1.1 255.255.255.0
> bridge-group 1
>
> interface Serial0
> ip address 10.1.2.1 255.255.255.0
> encapsulation ppp
> clockrate 64000
>
>
> bridge 1 protocol ieee
>
> router eigrp 100
> network 10.0.0.0
> redistribute connected
>
> _______________________________________________
>
> Hostname DTE_Router
> dlsw local-peer peer-id 10.1.1.2
> dlsw remote-peer 0 tcp 10.1.1.1
> dlsw bridge-group 1
>
> Loopback0
> =A0 ip address 10.1.1.2 255.255.255.0
>
> interface Ethernet0
> ip address 160.1.1.2 255.255.255.0
> bridge-group 1
>
> interface Serial0
> ip address 10.1.2.2 255.255.255.0
> encapsulation ppp
>
>
> bridge 1 protocol ieee
>
>
>
> router eigrp 100
> network 10.0.0.0
> redistribute connected
>
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>-- End of waffle from [EMAIL PROTECTED]
--
*** Please copy your emails to [EMAIL PROTECTED] ***
#-----------------------------------------------------------------------#
# .. .. | Richard Gallagher | Office:+32 2 704 5000 #
# || || | Euro-CATS | Direct:+32 2 704 5421 #
# || || | Cisco Systems Belgium | Fax: +32 2 704 6000 #
# |||| |||| | Pegasus Park | email: [EMAIL PROTECTED] #
#.:||||||:.:||||||:.| De Kleetlaan, 6A | #
# Cisco Systems | BE 1831 Diegem | http://www.cisco.com/tac #
#-----------------------------------------------------------------------#
"Normal people believe that if it ain't broke, don't fix it. Engineers
believe that if it ain't broke, it doesn't have enough features yet."
Check out this link: http://www.cisco.com/warp/customer/63/
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
