Dennis,
I did not read all the way to the second config. Your broadcast statement
might be okay but I would still double check the SPIDs against what Telco
has.
Heather
-----Original Message-----
From: Dennis Laganiere [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, January 31, 2001 12:44 PM
To: '[EMAIL PROTECTED]'
Subject: ISDN error
I'm setting up my new Emutel Lite ISDN simulator and I'm this close to being
up (hold thumb and index finger very close together). Can anybody tell me
what I'm doing wrong to get the last bit to work? Attached are the configs
and the output from the show ISDN status command. Thanks in advance to the
ones who figure it out.
RouterA
s ru
Building configuration...
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname routera
!
enable secret 5 $1$naI1$fKT5wJj8ZffPpJu294s6w.
!
ip subnet-zero
no ip domain-lookup
isdn switch-type basic-dms100
!
interface BRI0
ip address 196.1.1.1 255.255.255.0
no ip directed-broadcast
encapsulation ppp
dialer idle-timeout 90
dialer map ip 196.1.1.2 name routerb broadcast 8995201
dialer load-threshold 1 outbound
dialer-group 1
isdn switch-type basic-dms100
isdn spid1 5101 8995101
isdn spid2 5102 8995102
no fair-queue
ppp authentication chap
ppp multilink
!
ip classless
!
dialer-list 1 protocol ip permit
alias exec co config t
!
line con 0
password dismal
login
transport input none
line aux 0
password dismal
login
line vty 0 4
password dismal
login
!
end
routera#s isdn sta
Global ISDN Switchtype = basic-dms100
ISDN BRI0 interface
dsl 0, interface ISDN Switchtype = basic-dms100
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 64, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
TEI = 65, Ces = 2, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Spid Status:
TEI 64, ces = 1, state = 4(await init)
spid1 configured, spid1 sent, spid1 NOT valid
TEI 65, ces = 2, state = 4(await init)
spid2 configured, spid2 sent, spid2 NOT valid
Layer 3 Status:
0 Active Layer 3 Call(s)
Activated dsl 0 CCBs = 0
The Free Channel Mask: 0x80000003
Total Allocated ISDN CCBs = 0
routera#
RouterB
routerb#s ru
Building configuration...
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname routerb
!
!
ip subnet-zero
no ip domain-lookup
isdn switch-type basic-dms100
!
interface BRI0
ip address 196.1.1.2 255.255.255.0
no ip directed-broadcast
encapsulation ppp
dialer idle-timeout 90
dialer map ip 196.1.1.1 name routera
dialer-group 1
isdn switch-type basic-dms100
isdn spid1 5201 8995201
isdn spid2 5202 8995202
ppp multilink
!
ip classless
!
dialer-list 1 protocol ip permit
alias exec co config t
!
line con 0
transport input none
line aux 0
line vty 0 4
login
!
end
routerb#s isdn sta
Global ISDN Switchtype = basic-dms100
ISDN BRI0 interface
dsl 0, interface ISDN Switchtype = basic-dms100
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 64, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
TEI = 65, Ces = 2, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Spid Status:
TEI 64, ces = 1, state = 4(await init)
spid1 configured, spid1 sent, spid1 NOT valid
TEI 65, ces = 2, state = 4(await init)
spid2 configured, spid2 sent, spid2 NOT valid
Layer 3 Status:
0 Active Layer 3 Call(s)
Activated dsl 0 CCBs = 0
The Free Channel Mask: 0x80000003
Total Allocated ISDN CCBs = 0
routerb#
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]