Hi,
It depends on what you are using it for it can have different configs. You may need a
pin inserter to get the pins in although sometimes you can do it without but be
carefull not to break the wires.
A number of the installation guides have the pinouts.
Teunis,
Hobart, Tasmania
Australia
Teunis,On Thursday, February 01, 2001 at 05:02:16 PM, Paver. Charles wrote:
> Hello. I need some advice on the DB9 to rj45 coverter i just bought at
> microcenter. The pins nor wires in the back are not connected, so i have no
> way of knowing which pins go to which hole in the db9. Each of the holes
> are labeled from 1 to 9, but none of the wires have labeling on them. Does
> anyone or can anyone tell me which pins I should line up with their
> respective holes? Thanks!
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
--
www.tasmail.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
