Here is a good link for the pinout..
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/distrdir/dd2501/pin.ht
m#xtocid30761
----- Original Message -----
From: "Paver, Charles" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, February 01, 2001 4:02 PM
Subject: db9 to rj45 converter
> Hello. I need some advice on the DB9 to rj45 coverter i just bought at
> microcenter. The pins nor wires in the back are not connected, so i have
no
> way of knowing which pins go to which hole in the db9. Each of the holes
> are labeled from 1 to 9, but none of the wires have labeling on them.
Does
> anyone or can anyone tell me which pins I should line up with their
> respective holes? Thanks!
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
