I have a 2509 connected via an OCTAL cable to a few console ports. When I
connect using 'telnet router1 2001' I get no command line, but the
connection says '.....OPEN'. When I telnet to router1 and configure it,
console messages appear on the reverse telnet session, but still no command
prompt.
I have it configured just as it is here:
http://www.cisco.com/warp/public/793/access_dial/comm_server.html
Any help would be greatly appreciated.
thanks,
ramius
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]