Fred, The wildcard mask specifies the range of addresses (interfaces) that
OSPF will start on. So, it specifies the range of 206.202.0.0 -
206.202.3.255 as the ip addresses that OSPF will be started and the
interfaces will be assigned to Area 0. It does not do anything w.r.t
summarization.
Joe
"FREDL L AZARES" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> RouterA---------OSPF Area 0-----------RouterB---------------OSPF Area
> 0-------------RouterC
> 206.202.0.1/24 206.202.0.2/24 206.202.1.1/24
> 206.202.1.2/24
>
> Scenario: You have RIP routing domain and an OSPF Area 0 with
> redistribution. To reduce the number of RIP routes, you have to configure
> a summary-address in OSPF to only advertise one route to RIP networks.
>
> Configuration for RouterA:
>
> Router-A(config)#router ospf 1
> Router-A(config-router)#network 206.202.0.0 0.0.3.255 area 0
>
> I don't understand how they came up with wildcard mask 0.0.3.255. Can
> someone elaborate on this.
> Thanks in advance.
>
> Fred
> ________________________________________________________________
> GET INTERNET ACCESS FROM JUNO!
> Juno offers FREE or PREMIUM Internet access for less!
> Join Juno today! For your FREE software, visit:
> http://dl.www.juno.com/get/tagj.
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
