Hi,
You need to have the dialer-load and/or ppp multi set on both routers. You debug
seems to indicate the ISDN service is fine.
Oh make sure your dialer-load thresholds work for for both directions.
Teunis
Hobart, Tasmania
Australia
On Wednesday, February 07, 2001 at 09:14:42 AM, John Neiberger wrote:
> I've read that for certain switch types, for both channels to work you need to add
>the LDN for each B channel to your spid statements. That might be worth checking
>into a little further.
>
> John
>
> >
> > I have 2 Cisco routers connected by 1 ISDN link between the two. Router A is
> > setup to receive calls and Router B is setup to place the calls. What is
> > happening is Router B makes the call but only 1 B channel is coming up. Both
> > B channels on router B are good and I get the following
> >
> > Layer 1 Status:
> > ACTIVE
> > Layer 2 Status:
> > TEI = 69, State = MULTIPLE_FRAME_ESTABLISHED
> > TEI = 70, State = MULTIPLE_FRAME_ESTABLISHED
> > Layer 3 Status:
> > 1 Active Layer 3 Call(s)
> > Activated dsl 0 CCBs = 3
> > CCB:callid=0, sapi=0, ces=1, B-chan=0
> > CCB:callid=E1B6, sapi=0, ces=1, B-chan=1
> > CCB:callid=E4C6, sapi=0, ces=2, B-chan=0
> >
> > I have set the dialer load threshold to 1 on Router B and it is using PPP
> > Multilink
> >
> > I have two dialer map statements on router B that calls the SPIDS on Router
> > A.
> >
> > When I do a Show dialer I get the following
> >
> > BRI0 - dialer type = ISDN
> >
> > Dial String Successes Failures Last called Last status
> > 98254444 7 12893 0:00:29 successful
> > 98254445 3 12900 0:00:05 failed
> > 0 incoming call(s) have been screened.
> > BRI0: B-Channel 1
> > Idle timer (2147483 secs), Fast idle timer (30 secs)
> > Wait for carrier (30 secs), Re-enable (15 secs)
> > Time until disconnect 2147482 secs
> > Current call connected 3:17:59
> > Connected to 9825444(FIRE)
> > BRI0: B-Channel 2
> > Idle timer (2147483 secs), Fast idle timer (30 secs)
> > Wait for carrier (30 secs), Re-enable (15 secs)
> >
> > Router B constantly dials. Anybody have any Ideas?
> > Spids on Router A are ok
> >
> > Thanks
> >
> > _________________________________________________________________________
> > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
> Find the best deals on the web at AltaVista Shopping!
> http://www.shopping.altavista.com
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
--
www.tasmail.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
