Frank,
The only way to telnet to the outside interface is to enable ipsec. If you
don't feel like dealing with it (I didn't!!!) use SSH. You have to download
the 56-bit Key (Free from Cisco) and enable SSH on your PIX. IPSEC forces
you to use VPN client from your PC. Any SSH (I'm using Tera Term Pro, its
free) would do the job. Hope this helps a bit.
Nabil
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Frank Kim
Sent: Friday, February 09, 2001 3:42 PM
To: [EMAIL PROTECTED]
Subject: telnet access to pix
Hey guys,
I got eth0= security0 and eth1=security100. I'm able to telnet from the
inside network. Is there any way for me to telnet from the outside? Pix
has disabled this by default.
-Frank
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
