Frank,
Telnet access is only allowed from the inside
interface UNLESS you have IPSEC (Encryption standard
for VPN's) configured and then you would do this
telnet 192.168.1.1 255.255.255.0 outside
Paul
--- Frank Kim <[EMAIL PROTECTED]> wrote:
> Hey guys,
> I got eth0= security0 and eth1=security100. I'm
> able to telnet from the
> inside network. Is there any way for me to telnet
> from the outside? Pix
> has disabled this by default.
>
> -Frank
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail - only $35
a year! http://personal.mail.yahoo.com/
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
