The dialer load-threshold feature, works in combination with ppp
multilink...
What "dialer load-threshold" does is, define the load level that must be
exceeded on the first ISDN B channel before the router attempts to bring up
a second B channel for a multilink PPP connection.
""Adam Burgess"" <[EMAIL PROTECTED]> wrote in message
011001c093dd$116e7140$[EMAIL PROTECTED]">news:011001c093dd$116e7140$[EMAIL PROTECTED]...
> To all DDR gurus:
>
> Are there any benefits in using the Cisco Proprietary =
> Bandwidth-on-Demand feature (ie. dialer load-threshold), rather than =
> using ppp multilink (other than the fact the ppp multilink is standard)?
>
> Regards
>
> Adam Burgess
> Brisbane, Australia
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
