The "backup delay command" is only for Backup interfaces... It cannot be
used to control a primary links dial settings...
""tv"" <[EMAIL PROTECTED]> wrote in message
005301c09495$d6bb2200$2501a8c0@phat23">news:005301c09495$d6bb2200$2501a8c0@phat23...
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios112/112cg_cr/1rb
> ook/1rintrfc.htm#xtocid1667710
>
> backup delay command
>
> tv
> ----- Original Message -----
> From: "Jim Bond" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Sunday, February 11, 2001 6:48 PM
> Subject: ISDN dialout
>
>
> > Hello,
> >
> > I'm wondering if I can put a delay, say 10 seconds, on
> > a dialer interface so that ISDN will NOT come up
> > immediately after interesting traffic comes?
> >
> > Thanks in advance.
> >
> >
> > Jim
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Get personalized email addresses from Yahoo! Mail - only $35
> > a year! http://personal.mail.yahoo.com/
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
