----- Original Message -----
From: "Roger Sohn" <[EMAIL PROTECTED]>
> I have Cisco 7206VXR router and the unit has 2 slots for PCMCIA Flash
Cards.
> The IOS I'm running is 12.0. I have 3 cards of 16MB, 48MB, and another
for
> 128MB.
>
> Here's the problem..
>
> I can do everything with the 16MB card without any problems. But when I
try
> to access the 48MB or the 128MB it gives me an error message of "Open
> device slot1 failed (Device not ready)".
>
>
The 48MB and 110MB cards are ATA Flask Disks rather then Flash Cards. dir
disk1: instead of dir slot1: and you should be good to go.
David C Prall [EMAIL PROTECTED] http://dcp.dcptech.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
