It is possible.
There is actually no configuration on the router. You will need to set the
modem to talk at 9600, 8, N, 1 with no local echo. You also need to set the
modem to auto answer. Your modem should have documentation with the proper
"AT" commands that you will need to issue. Save this configuration to the
modems NVRAM and plug it into the router.
Chris Lemagie...
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
John
Sent: Wednesday, February 14, 2001 7:51 AM
To: [EMAIL PROTECTED]
Subject: Modem to Console Port
Is is possible to connect a modem to the console port for remote
configuration on the Cisco 1600 series?
If so would you please provide me with a sample configuration?
Thank you in advance for your assistance.
John Huston
[EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
