1)Connect the modem to a PC
> 2)Set the dip switches on the modem to 1,3, and 8 down, all the rest up.
> 3) Power on the modem
> 4) Begin a terminal session (9600,8,N,1)
> 5) Type AT and you should get an OK from the modem
> 6) Type AT&F&W0
> 7) Type ATI4 to get the current modem settings
> 8) Copy the following string on the terminal (this will also write it to
> the
> modem's NVRAM)
> ATE0F1Q1&I0&H0&K0&A0&B1&N6&C1&D0&W0
> (Note: This turns echo off as well, so you won't see any further commands
> you type.)
> 9) Type ATI4. You should see this:
>
> US Robotics Sportster 33600 Fax Settings...
>
> B0 E0 F1 M1 Q1 V1 X1 Y0
> Baud=9600 Parity=N Wordlen=8
> Dial=Tone On Hook
>
> &A0 &B1 &C1 &D0 &G0 &H0 &I0 &K0 &M4 &N6
> &P0 &R1 &S0 &T5 &U0 &Y1
>
> S00=001 S01=000 S02=043 S03=103 S04=010 S05=006 S06=002
> S07=060 S08=002 S09=006 S10=014 S11=070 S12=050 S13=000
> S15=000 S16=000 S18=000 S19=000 S21=010 S22=017 S23=019
> S25=005 S27=000 S28=008 S29=020 S30=000 S31=128 S32=001
> S33=000 S34=000 S36=014 S38=000
>
> 10) Power off the modem
> 11) Now set dip switches 1,4,8 to down and all others up
> 12) Connect modem to console of router
> 13) Power modem on
> 14) Dial the modem and you should get a router prompt after you hit return
> 15) Quit to close the session to the router
> 16) Disconnect
>
> Note: If you need to disconnect your modem while you are connected to the
> router, put in +++ at any prompt.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of John
Sent: Wednesday, February 14, 2001 4:07 PM
To: [EMAIL PROTECTED]
Subject: Re: Modem to Console Port
Jason,
Thank you very much. The dip switch settings did the trick. I am
installing these routers remote and from time to time when we turn up the
circuits something doesn't work right. So, I ship a modem, have the
customer plug it in to the fax machine jac and bingo, I can config it just
like I was setting there. That way I don't have to be on a plane for a day
and a half for a 5 min job.
Another success story found on Groupstudy.com
""jason lynch"" <[EMAIL PROTECTED]> wrote in message
96ejci$c0b$[EMAIL PROTECTED]">news:96ejci$c0b$[EMAIL PROTECTED]...
> Or, if you're using a US Robotics Sportster, just set the dip switches to
> all up and 7 down and dial in.
>
> Make sure you specify login and password under line con 0.
>
> "Chris Lemagie" <[EMAIL PROTECTED]> wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > It is possible.
> >
> > There is actually no configuration on the router. You will need to set
> the
> > modem to talk at 9600, 8, N, 1 with no local echo. You also need to set
> the
> > modem to auto answer. Your modem should have documentation with the
> proper
> > "AT" commands that you will need to issue. Save this configuration to
the
> > modems NVRAM and plug it into the router.
> >
> > Chris Lemagie...
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> > John
> > Sent: Wednesday, February 14, 2001 7:51 AM
> > To: [EMAIL PROTECTED]
> > Subject: Modem to Console Port
> >
> >
> > Is is possible to connect a modem to the console port for remote
> > configuration on the Cisco 1600 series?
> >
> > If so would you please provide me with a sample configuration?
> >
> > Thank you in advance for your assistance.
> >
> > John Huston
> > [EMAIL PROTECTED]
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]