Thanks for all your input on setting up a floating
static suggestion, but the 2 PVCs that I have are both
active and in production, and each is carrying
different type of traffic.
They are both acting as primary links. I want to set
up something that if one fail, it will jump to the
other one. I don't think floating static will work in
this case.
Adam
--- Kelly D Griffin <[EMAIL PROTECTED]> wrote:
> The way my company does it is to weight routes for
> the two PVC's.
>
> Serial0/0.1 point-to-point
> ip address 192.168.255.1 255.255.255.252
> no ip route-cache
> no cdp enable
> frame-relay interface-dlci 20
> !
> Serial0/0.2 point-to-point
> ip address 192.168.255.5 255.255.255.252
> no ip route-cache
> no cdp enable
> frame-relay interface-dlci 21
> !
> ip route 10.0.0.0 255.0.0.0 192.168.255.2
> ip route 10.0.0.0 255.0.0.0 192.168.255.6 200
> !
> end
> wr
>
> This says to route the traffic over S0/0.1 as it is
> directly connected.
> Route the traffic over S0/0.2 if the primary link
> should become unreachable.
> You have to be careful with the administrative
> distance on the backup route.
> If you are running a routing protocol (OSPF, RIP,
> etc.) you will have to
> take into account what the default distances are for
> these protocols. Keep
> in mind that a route that points to an interface is
> distance 0 and a route
> to an IP address is distance 1.
>
> Kelly D Griffin, CCNA, CCDA
> Network Engineer
> Kg2 Network Design
> http://www.kg2.com
>
>
> ----- Original Message -----
> From: "Adam Wang" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Wednesday, February 14, 2001 10:08 AM
> Subject: backup subinterface on another subinterface
>
>
> > Hi group,
> >
> > I have 2 PVCs setup using Frame Relay on a serial
> > interface with 2 subinterafces, and I want these 2
> > subinterfaces to backup each other when 1 fails.
> >
> > I did backup interface s0.2, but it won't allow a
> > subinterface on the backup command, only the
> physical
> > interface. So backup interface s0 is possible.
> >
> > Why is that and how can I do this
> >
> >
> > Thanks in advance
> >
> >
> > Adam
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Get personalized email addresses from Yahoo! Mail
> - only $35
> > a year! http://personal.mail.yahoo.com/
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
> > ____________________________________________
> > http://1cis.com
> > Free E-mail Servers with unlimited mailboxes
> > 1st Class Internet Solutions
>
> ____________________________________________
> http://1cis.com
> Free E-mail Servers with unlimited mailboxes
> 1st Class Internet Solutions
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail - only $35
a year! http://personal.mail.yahoo.com/
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
