Well I'm sure that is some nice reading, and I know what the modem inout
command is supposed to be used for, but I was saying by using this command
on my terminal server I cleared up the glitch I encountered. Aparently there
is another way to do this using the "no exec" command.
>>>Brian
>From: "Jim Dixon" <[EMAIL PROTECTED]>
>Reply-To: <[EMAIL PROTECTED]>
>To: "'Brian Lodwick'" <[EMAIL PROTECTED]>
>Subject: RE: Terminal Server for beginners
>Date: Wed, 14 Feb 2001 13:21:19 -0600
>
>If you want your modems to work both ways you put modem inout.
>if you want all your keystrokes and input to be transported you put
>transport input all.
>If you look at
>http://www.cisco.com/warp/public/793/access_dial/comm_server.html
>it gives you some explanation of what this command does.
>http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/dial_
>r/drprt1/drtermop.htm
>also provides some detail.
>if you put transport input none and expect to get in you are going to have
>some windshield time. :)
>http://www.cisco.com/univercd/cc/td/doc/cisintwk/itg_v1/tr1916.htm#xtocid848
>02
>provides information about modem inout.
>As does
>http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/113ed_cr/d
>ial_c/dcprt1/dcmodem.htm
>
>Enjoy!
>
>-----Original Message-----
>From: Brian Lodwick [mailto:[EMAIL PROTECTED]]
>Sent: Wednesday, February 14, 2001 12:43 PM
>To: [EMAIL PROTECTED]
>Subject: Terminal Server for beginners
>
>
>Group
>I have been fighting with the performance of my terminal server for a few
>weeks now. It works, and I have been using it, but like I said I have been
>fighting with it. It seems to send characters to other ports when I haven't
>initiated a connection to that port. The way I can tell this is when I get
>onto that port it is responding to characters entered even though I haven't
>entered anything. This is quite peculiar. I have looked at many books to
>see
>if I am doing something wrong and the only indication was in Bruce Caslow's
>book saying if your terminal server incorrectly shows active connections on
>lines that don't have any connections established the command "modem host"
>on the line config will fix this. Well this didn't fix mine for s*#@. I
>finally figured out the way to fix mine was to add "modem inout" boom it
>works like a charm. I am running 12.0.8 on this 2511. Maybe this is
>something everyone already knew, but I didn't and maybe it will save
>someone
>else some pain.
>
>config t
>ip host r1 10.0.0.1 2001
>int loopback 0
>ip address 10.0.0.1 255.255.255.0
>exit
>line 1 8
>transport input all
>modem inout
>exec-timeout 0 0
>
>
>other routers assure the exec-timeout is set to 0 0 on the console.
>
>
>_________________________________________________________________
>Get your FREE download of MSN Explorer at http://explorer.msn.com
>
>_________________________________
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
