sorry for OSPF
-----Original Message-----
From: Robert Nickson
Sent: Thursday, February 15, 2001 10:10 AM
To: [EMAIL PROTECTED]
Subject: ccnp routing frames
On the CCNP routing exam is there any questions on (i.e do i have to
memorise)
frame for frame the format of hello packets,DD packets,LSA packet
frames...etc
like ..version,type,packet length,route ID,Area ID,Checksum,Au
type,Authentication etc etc
or is there certain fields i should learn
Any help would be useful
-----Original Message-----
From: Cisco [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, February 14, 2001 8:48 PM
To: [EMAIL PROTECTED]
Subject: NAT/PAT port pass-through
Hi all,
Im just experimenting with NAT/PAT and want to try to tunnel back to an
internal NT server to establish a VPN with it. Say the internal address is
10.1.1.100 I want to pass all traffic from the external IP w.x.y.z(i s0) to
internal 10.1.1.100(int e0) for the following ports
Protocol ID TCP, Port 1723
Protocol ID 47, port all
Can anyone help out with some config pointers?
I've got NAT/PAT set up and working.
I would like to use PPTP to the router and let the router establish the VPN
but I don't think this router will support it. It is running
11.1(c1600-y-l.113-2)
Any thoughts?
Craig Lindstrom
eSage
http://www.eSage.com
(801) 796-9595
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
