I have a question about the pix firewall.. I have a network with a couple
of devices on it. Here is the network:
Frame ----> router---> netra t1----> PIX firewall---> Switch--> The
switch is where the netra t1 and the router and firewall are connected.
When I reboot my netra t1 the PIX firewall grabs the traffic instead of
sending back up stream through the Cisco firewall. I remove the firewall
everything works okay. Does pix have some type of proxy ARP that grabs the
traffic???
Please help
Craig Hyman
SUN SRS Implementation Team
Help Desk Tier 2
[EMAIL PROTECTED]
Broomfield Office 303-272-2661
Virtual Office Phone Number 925-777-0672
SkyPager Number 1-888-860-5913
-----Original Message-----
From: Deepak Sharma [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 15, 2001 9:57 PM
To: cisco
Subject: PIX firewall
quick question, and probably dumb question!!.....
when I set up a pix firewall
user------56k dialup------>pix------nt server----
to authenticate the user, does pix use NT auth. or another type of
auth.username/password has to be setup within pix...
thanks
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
