effect you have only 1 gateway IP.
HTH
HV
-----Original Message-----
From: Ya Wen
To: Stull, Cory
Cc: '[EMAIL PROTECTED]'
Sent: 2/20/01 1:10 PM
Subject: Re: 2 default routes on PIX???
Cory:
Based on my experience, you can't set up two default routes on the PIX,
it
simply doesn't allow you to do that. For load balancing, I would put
another router in front of the PIX and the new router will share a same
public LAN with the other two routers. You can start setting up load
balancing from there either using static, IGP or even BGP.
-Ya
On Tue, 20 Feb 2001, Stull, Cory wrote:
> Scenario: 2 2600 routers both with T1's to the same ISP.
> 1 PIX firewall between internal lan and the 2 2600's.
>
> Can I have 2 default routes in the PIX pointing one to one 2600 and
the
> other to the other 2600?
> If so is this doing per packet load balancing? and what happens when
one T1
> goes down?
>
>
> I would have set this up in a lab to test it but don't have a PIX. I
don't
> know if a router and PIX would do the same thing.
>
>
> Thanks in advance.
>
>
>
> Cory
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
