To extend this line of thought - if you had another
2600 inside the PIX, could you point two default
routes through the PIX to the other routers?
I don't think there is a way to run two HSRP groups in
this case for redundancy, but we could have the two
2600 Internet routers point to each other as backup.
This would add an extra hop if one were to go down,
but it might be better than spending money on another
router.

Michael

--- Paul Lalonde <[EMAIL PROTECTED]> wrote:
> Cory,
> 
> I'm afraid the PIX does not support load balancing
> (or multiple default
> routes). You'll need an intermediary router
> (in-between) to handle the
> load-balancing.
> 
> Paul
> 
> ""Stull, Cory"" <[EMAIL PROTECTED]> wrote in message
>
0D7A05A19CE4D211BD050008C7330FE7259076@CCUPDC">news:0D7A05A19CE4D211BD050008C7330FE7259076@CCUPDC...
> > Scenario:   2 2600 routers both with T1's to the
> same ISP.
> >     1 PIX firewall between internal lan and the 2
> 2600's.
> >
> > Can I have 2 default routes in the PIX pointing
> one to one 2600 and the
> > other to the other 2600?
> > If so is this doing per packet load balancing? and
> what happens when one
> T1
> > goes down?
> >
> >
> > I would have set this up in a lab to test it but
> don't have a PIX.  I
> don't
> > know if a router and PIX would do the same thing.
> >
> >
> > Thanks in advance.
> >
> >
> >
> > Cory
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
> >
> 
> 
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]


__________________________________________________
Do You Yahoo!?
Yahoo! Auctions - Buy the things you want at great prices! http://auctions.yahoo.com/

_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to