just need to verify my thinking:
example: serial line (PPP) connection between routers A and B using ip
unnumbered.
router A:
e0=192.168.1.1/24
s0=192.168.3.1/24
routing table for A:
c 192.168.1.0/24 is directly connected, ethernet0
r 192.168.2.0/24 [120/1] via 192.168.3.2, 00:00:05, serial0
s* 0.0.0.0/0 is directly connected, serial0
router B:
e0=192.168.2.1/24
s0=192.168.3.2/24
routing table B:
r 192.168.1.0/24 [120/1] via 192.168.3.2, 00:00:06, serial0
c 192.168.2.0/24 is directly connected, ethernet0
s* 0.0.0.0/0 is directly connected, serial0
i thought that the routing table should reflect the ethernet ip address of
the remote router on local serial interface? i don't see it here. is it an
error or is it me?
thanx,
p.
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
