OMG, but I'd really be impressed if you connected a VIC-20 up to a TRS-80.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Sunday, February 25, 2001 10:01 AM
To: Circusnuts
Cc: [EMAIL PROTECTED]
Subject: RE: Dial-Up Experts...
I've done this with two modems and two computers... not trying to show my
age but I connected a Kaypro 2X and a Commodore 128 through their respective
modems at 300 baud ;-) Pretty big feat back then...
Tim
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Circusnuts
> Sent: Sunday, February 25, 2001 3:50 PM
> To: [EMAIL PROTECTED]
> Subject: Dial-Up Experts...
>
>
> Hey All- is there a way to simulate dial-up without going through the =
> Telco (i.e. point to point, using no dial tone). I'm practicing CCIE =
> labs & have a few with dial scenario. I wondered it I could do a call =
> back without tying up two phone lines, say a modem off of my 2509 =
> connected to another modem @ Aux of another router.
>
> Any advice would be greatly appreciated...
>
> Thanks
> Phil
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
