Err.. yes. Depends what sort of dial-out access you are talking about. For ISDN, it's a standard PRI setup - configure controllers, configure D-channels, configure dialer interfaces, don't forget the dialer group and dialer list stuff to define interesting traffic, add any dial-out related bits like load-threshold commands, min/max links etc. There's heaps of stuff on dialup configs on CCO, although a lot of it for the AS5300 assumes that it will only be accepting calls. Try http://www.cisco.com/warp/public/793/access_dial/1.html - it may be useful to you, but it depends exactly what you're trying to do. JMcL ---------------------- Forwarded by Jenny Mcleod/NSO/CSDA on 27/02/2001 08:57 am --------------------------- [EMAIL PROTECTED]@groupstudy.com on 27/02/2001 01:22:26 am Please respond to [EMAIL PROTECTED] Sent by: [EMAIL PROTECTED] To: <[EMAIL PROTECTED]> cc: <[EMAIL PROTECTED]> Subject: RE: Dial-Up AS5300 Dial Out Is there anyone who has experience setting up an AS5300 for dial-out capability and if so how is it done?? _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
