It is NOT true that ethernet is half and fastethernet is full duplex.
Either 10Mbps or 100Mbps ehternet can be run in half or full duplex mode.
And offhand I don't know if the 2500 AUI port will do full ethernet.
--
Neil Schneider
MCT MCSE CCSI CCNP
"SAIF" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> NO ITS ETHERNET PORT AND WORKING HALF DUPLEX ONLY ,U SEE CISCO GIVES
FASTETHERNET PORTS
> SPECIALLY IN THEIR ROUTERS SPECIALLY IN 4XXX SERIES AND U KNOW ETHERNET
WORKS IN HALF
> DUPLEX AND FASTETHERNET WORKS IN FULL DUPLEX SO THE RESULT IS AUI PORT IS
HALF DUPLEX
> ETHERNET NOT AUTO SENSE AND IF U WANT AUTOSENSE 10/100 BASE T GO TO ANY
OTHER ROUTER
> ,CHECK THE ROUTER;S MANUAL :)
> HOPT IT WILL HELP
> IS IT ?
>
> Turfis wrote:
>
> > Is the Ethernet AUI port on the 2500 series Cisco routers Full Duplex
> > compatible? Does it autonegoiate? Can you hard code the interface for
> > half/full/auto? Thanks!
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
