SAIF,
Glad you looked it up. Now, how about in the future you check _before_ you
start spreading incorrect info?
TIA
B
"SAIF" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Yeah u r right ,i checked it I was confused thanx for correction budy :)
>
> Eric Fairfield wrote:
>
> > 100 Mb FE still falls under CSMA/CD rules especially when using a Fast
> > Ethernet Hub that doesn't support Full duplex. There can and will be
> > collisions at 100Mb Fast Ethernet in a shared environment.
> >
> > --
> > Eric Fairfield
> > CCIE #6413
> >
> > "SAIF" <[EMAIL PROTECTED]> wrote in message
> > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > well its not a terminology thing u see its understood when u use
100mbps
> > its then not
> > > csma/cd ethernet thing ,they made it like thre will be no collisions
and
> > speed will be
> > > 10 times than 10 mbps
> > > yes u r right on 36xx router there is full/half/auto duplex but u
didnt
> > get the idea
> > > ,its basically technology which is sensing which media is supported to
> > that interface
> > > ,if it is 10mbps then interface will make it half duplex ethernet and
> > iffff it is 100mbs
> > > it will make it fast ethernet full duplex and u have choice to make it
> > half/full duplex
> > > by ur choice according to ur existing medium and toplogy
> > > THAT PORT MUST BE NOT A FASTETHERNET PORT BUT IT CAN BE IF U USE IT
IN
> > 100MBPS WAY
> > > THERE IS ANOTHER THING YES IT IS POSSIBLEEEE I AGREE U CAN WORK 10BASE
T
> > (ONLY NOT
> > > COAXIAL) WITH FULL DUPLEX BUT THE THING IS THAT WHAT I WAS POINTING
THAT
> > CISCO PRODUCTS
> > > USUALLY DONT SUPPORT FULL DUPLEX WITH 10MBPS
> > > AM I WRONG ?????
> > >
> > > Neil Schneider wrote:
> > >
> > > > Sorry but you are incorrect. (unless we just have a terminology
> > difference
> > > > here) Just becuase you are running 100mbps. it is not automatically
full
> > > > duplex. the Fastethernet ports on routers (3640 seriesfor example)
can
> > be
> > > > set to full/half/auto duplex. why bother with a half duplex setting
if
> > all
> > > > fastethernet is full duplex?
> > > >
> > > > --
> > > > Neil Schneider
> > > > MCT MCSE CCSI CCNP
> > > >
> > > > "SAIF" <[EMAIL PROTECTED]> wrote in message
> > > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > > > 100mbps is not ethernet be sure its fast ethernet ,also their is
no
> > > > collisions in fast
> > > > > ethernet ,its colliision free and this is only possible if u have
one
> > way
> > > > to send and
> > > > > one way to recieve data simultaneously :) i am sure u got the idea
> > > > > secondly in ethernet there are collisions and if there are
colliisions
> > > > Can u use one to
> > > > > send and one way to recieve simultaneously with collisions so if u
> > cant
> > > > the result is
> > > > > ethernet works in half duplex mode and fast ethernnet works in
full
> > duplex
> > > > > if u have any thing different than me plz share with us
> > > > > waiting ur reply
> > > > > Saif
> > > > >
> > > > > Neil Schneider wrote:
> > > > >
> > > > > > It is NOT true that ethernet is half and fastethernet is full
> > duplex.
> > > > > > Either 10Mbps or 100Mbps ehternet can be run in half or full
duplex
> > > > mode.
> > > > > > And offhand I don't know if the 2500 AUI port will do full
ethernet.
> > > > > >
> > > > > > --
> > > > > > Neil Schneider
> > > > > > MCT MCSE CCSI CCNP
> > > > > >
> > > > > > "SAIF" <[EMAIL PROTECTED]> wrote in message
> > > > > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > > > > > NO ITS ETHERNET PORT AND WORKING HALF DUPLEX ONLY ,U SEE CISCO
> > GIVES
> > > > > > FASTETHERNET PORTS
> > > > > > > SPECIALLY IN THEIR ROUTERS SPECIALLY IN 4XXX SERIES AND U KNOW
> > > > ETHERNET
> > > > > > WORKS IN HALF
> > > > > > > DUPLEX AND FASTETHERNET WORKS IN FULL DUPLEX SO THE RESULT IS
AUI
> > > > PORT IS
> > > > > > HALF DUPLEX
> > > > > > > ETHERNET NOT AUTO SENSE AND IF U WANT AUTOSENSE 10/100 BASE T
GO
> > TO
> > > > ANY
> > > > > > OTHER ROUTER
> > > > > > > ,CHECK THE ROUTER;S MANUAL :)
> > > > > > > HOPT IT WILL HELP
> > > > > > > IS IT ?
> > > > > > >
> > > > > > > Turfis wrote:
> > > > > > >
> > > > > > > > Is the Ethernet AUI port on the 2500 series Cisco routers
Full
> > > > Duplex
> > > > > > > > compatible? Does it autonegoiate? Can you hard code the
> > interface
> > > > for
> > > > > > > > half/full/auto? Thanks!
> > > > > > > >
> > > > > > > > _________________________________
> > > > > > > > FAQ, list archives, and subscription info:
> > > > > > http://www.groupstudy.com/list/cisco.html
> > > > > > > > Report misconduct and Nondisclosure violations to
> > > > [EMAIL PROTECTED]
> > > > > > >
> > > > > > > _________________________________
> > > > > > > FAQ, list archives, and subscription info:
> > > > > > http://www.groupstudy.com/list/cisco.html
> > > > > > > Report misconduct and Nondisclosure violations to
> > [EMAIL PROTECTED]
> > > > > > >
> > > > > >
> > > > > > _________________________________
> > > > > > FAQ, list archives, and subscription info:
> > > > http://www.groupstudy.com/list/cisco.html
> > > > > > Report misconduct and Nondisclosure violations to
> > [EMAIL PROTECTED]
> > > > >
> > > > > _________________________________
> > > > > FAQ, list archives, and subscription info:
> > > > http://www.groupstudy.com/list/cisco.html
> > > > > Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
> > > > >
> > > >
> > > > _________________________________
> > > > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > > > Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
> > >
> > > _________________________________
> > > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
