Check the archives for my earlier post regarding this topic. Inverse ATM
multiplexing (where available) seems to be a very good option. Frac T3 is
another option. Muxed T1 lines seem to be falling out of favor.
Craig
At 09:17 AM 2/28/2001 -0600, you wrote:
>You know I've never given this much thought I just assumed it was possible
>to multiplex serveral T1 lines.
>If I wanted a 10mb connection between to points and I had 6
>individual T1 lines can I/do I multiplex the lines or do I have to load
>balance between all six lines. The later doesn't make much since to me
>because I'd have to have a Router with 6 WAN ports to support my a 10mb
>connection. Maybe my thinking is all wrong on this. Any help would be
>appreciated.
>
>Thanks,
>
>Keith
>
>
>_________________________________
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
