By default IP split-horizon is disabled on a frame-relay physical IP
interface,
enabled on a frame-relay point-to-point IP subinterface, and enabled
on a frame-relay multipoint IP subinterface.
Caslow's book has a good chapter on this.
Julie Stewart
----- Original Message -----
From: "Jose Rodriguez" <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: <[EMAIL PROTECTED]>
Sent: Wednesday, February 28, 2001 11:18 PM
Subject: CCNA question
> Hello,
>
> I wanted to ask what were the defaults for split horizon on frame relay.
I
> thought that split horizon was disabled on
>
> 1) FR interfaces without sub-ifs
> 2) FR multipoint interfaces
>
> and enabled on
>
> 1) FR point to point interfaces
>
> --
>
> Jose Rodriguez
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
