If he is using Hyperterminal to the console port, he should be using a roll-over cable.
Also, make sure the DB9/RJ45 connector pin-out are correct. Don't have my chart handy
or I would include (it's available on CCO somewhere + I'm sure it's in the archives).
Tom Lisa, Instructor, CCNA, CCAI
Community College of Southern Nevada
Cisco Regional Networking Academy
Rizzo Damian wrote:
> Did you try another straight through cable? 9 times out of 10, the cable is
> to blame.
>
> -----Original Message-----
> From: Charles Paver [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, February 28, 2001 9:24 PM
> To: [EMAIL PROTECTED]
> Subject: 1900 switch
>
> Hi--I cant hyperterminal into my new 1900 series
> switch! I changed the baud rate to 9600, and left all
> the same, but still no dice! Also, I changed the flow
> control to hware, to none...and I cant get on.
> Also,Im using nt ws, as well as windows 98. Same
> error every time--weird characters across the screen.
> such as atx0h0
>
> its weird...
> any ideas?
>
>
> __________________________________________________
> Do You Yahoo!?
> Get email at your own domain with Yahoo! Mail.
> http://personal.mail.yahoo.com/
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
