Mihai Dumitru wrote:
>
> This is true for the Catalyst switches with set / clear commands. For
> the IOS based devices, you have "speed auto" and "duplex auto".
>
P.S. It is not recommended to leave the speed and duplex to auto
(default). Set them manually.
> Gayathri wrote:
> >
> > Am I right to say that if I set the port speed to auto , the duplex setting
> > is also set accordingly? Or should we manually set it to full duplex?
> >
> > Thanks
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> --
>
> Mihai Dumitru
> Systems Engineer, ROMSYS SA
>
> tel: +40 1 2300810, mobile: +40 92 764287
> fax: +40 1 2300815
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
--
Mihai Dumitru
Systems Engineer, ROMSYS SA
tel: +40 1 2300810, mobile: +40 92 764287
fax: +40 1 2300815
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]