This sounds like a job for a syslog server. If you enable remote logging,
you'll be able to see any error conditions which led up to the reboot.
The alternative is to be watching and waiting when a reboot occurs, and who
wants to do that?
The other thing that you might want to check is to do a 'sh ver'. The reason
for the last reset will be listed (It may be cryptic, but it might provide you
with an idea of where to start looking).
----- Original Message -----
From: "Stuart J Pittwood" <[EMAIL PROTECTED]>
To: "Cisco" <[EMAIL PROTECTED]>
Sent: Friday, March 02, 2001 11:54 AM
Subject: Switch Problem
> Hi,
>
> Many of my users have been reporting network connectivity disapearing and
> comming back about a min later.
>
> While looking through the logs of one switch (a 2924M-CL-EN) I noticed it
> had been rebooted recently.
>
> What would make a switch reboot itself? The switch isn't anywhere near
> capacity (according to the scale on the front).
>
> Any help greatly appreciated
> ______________________________
> Stuart J Pittwood, CCNA
> [EMAIL PROTECTED]
> http://www.stuartpittwood.net
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
