Custom Centrex (sp?) ISDN groups often use single or even no SPIDs. Try
specifying the SPID twice, or not at all. Basically, the SPID is assigned
to both B channels.
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
Cisco resources: http://r2cisco.artoo.net/
""John"" <[EMAIL PROTECTED]> wrote in message
97pbsf$4n7$[EMAIL PROTECTED]">news:97pbsf$4n7$[EMAIL PROTECTED]...
> I have included a config I am deploying on a hub-and-spoke deployment via
> frame-relay. I am having problems getting the ISDN interface to come up
> with only one spid. I do not have a strong background in ISDN and would
> appreciate assistance to tell me where I am going wrong in my config.
>
> Thank you in advance for your help.
>
> Regards,
>
> John Huston
> [EMAIL PROTECTED]
>
> begin config===============
>
> service timestamps debug uptime
> service timestamps log uptime
> service password-encryption
> !
> hostname me
> !
> enable password you
> !
> logging buffered 4096 debugging
> !
> username test password 0 test
> username me password 0 you
> !
> !
> !
> !
> memory-size iomem 25
> ip subnet-zero
> no ip domain-lookup
> ip dhcp excluded-address x.x.x.x x.x.x.x
> !
> ip dhcp pool primary
> network x.x.x.x x.x.x.x
> netbios-name-server x.x.x.x
> default-router x.x.x.x
> lease 5
> !
> isdn switch-type basic-ni
> !
> !
> !
> interface Serial0
> ip unnumbered FastEthernet0
> encapsulation frame-relay
> no fair-queue
> service-module t1 timeslots 23-24
> frame-relay map ip x.x.x.x xxx broadcast
> no shut
> !
>
> interface BRI0
> description Backup ISDN interface
> ip address x.x.x.x x.x.x.x
> encapsulation ppp
> dialer idle-timeout 30
> dialer string xxxxxxxxxxx
> dialer load-threshold 25 outbound
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 xxxxxxxxxxx
> no cdp enable
> ppp authentication pap callin
> ppp pap sent-username me password you
> no shut
> !
> interface FastEthernet0
> ip address x.x.x.x x.x.x.x
> no ip route-cache
> speed auto
> no fair-queue
> no shut
> !
> router eigrp 20
> network x.x.x.x
> !
> ip classless
> no ip http server
> !
> !
> map-class dialer 64k
> access-list 101 deny eigrp any any
> access-list 101 permit ip any any
> dialer-list 1 protocol ip list 101
> !
> line con 0
> exec-timeout 0 0
> transport input none
> line aux 0
> line vty 0 4
> password xxx
> login
> !
> no scheduler allocate
> end
>
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
