I cannot get the ISDN inteface to come up and using the same spid doesn't
work either. I guess the best thing to ask is: How do I modify my config
to use only one spid?
Thanks for your input Craig!
"Craig Columbus" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> As in the areas of the country that assign you 64k ISDN service? In that
> case, you'll still need two SPIDS if you're using BRI; the 64k restriction
> just means that the provider doesn't support the multilink function.
Enter
> both SPIDs in your config.
>
> With that said, what is the specific problem that you're encountering? Is
> it that the interface won't come up? Is it that the call won't dial? Is
> it that the call dials, but won't authenticate? Try using some of the
more
> common debug commands for this scenario: debug isdn events, debug isdn
> q931, debug isdn q921, debug ppp authentication, debug ppp negotiation,
> etc.. Only turn up the ones you need or you'll have so much information
> that it'll be difficult to sort through it all.
>
> Good luck,
> Craig
>
> At 05:31 PM 3/3/2001 -0600, you wrote:
> >What if you only one have B channel?
> >
> >""J Roysdon"" <[EMAIL PROTECTED]> wrote in message
> >97q345$os1$[EMAIL PROTECTED]">news:97q345$os1$[EMAIL PROTECTED]...
> > > Custom Centrex (sp?) ISDN groups often use single or even no SPIDs.
Try
> > > specifying the SPID twice, or not at all. Basically, the SPID is
assigned
> > > to both B channels.
> > >
> > > --
> > > Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
> > > List email: [EMAIL PROTECTED]
> > > Homepage: http://jason.artoo.net/
> > > Cisco resources: http://r2cisco.artoo.net/
> > >
> > >
> > > ""John"" <[EMAIL PROTECTED]> wrote in message
> > > 97pbsf$4n7$[EMAIL PROTECTED]">news:97pbsf$4n7$[EMAIL PROTECTED]...
> > > > I have included a config I am deploying on a hub-and-spoke
deployment
> >via
> > > > frame-relay. I am having problems getting the ISDN interface to
come up
> > > > with only one spid. I do not have a strong background in ISDN and
would
> > > > appreciate assistance to tell me where I am going wrong in my
config.
> > > >
> > > > Thank you in advance for your help.
> > > >
> > > > Regards,
> > > >
> > > > John Huston
> > > > [EMAIL PROTECTED]
> > > >
> > > > begin config===============
> > > >
> > > > service timestamps debug uptime
> > > > service timestamps log uptime
> > > > service password-encryption
> > > > !
> > > > hostname me
> > > > !
> > > > enable password you
> > > > !
> > > > logging buffered 4096 debugging
> > > > !
> > > > username test password 0 test
> > > > username me password 0 you
> > > > !
> > > > !
> > > > !
> > > > !
> > > > memory-size iomem 25
> > > > ip subnet-zero
> > > > no ip domain-lookup
> > > > ip dhcp excluded-address x.x.x.x x.x.x.x
> > > > !
> > > > ip dhcp pool primary
> > > > network x.x.x.x x.x.x.x
> > > > netbios-name-server x.x.x.x
> > > > default-router x.x.x.x
> > > > lease 5
> > > > !
> > > > isdn switch-type basic-ni
> > > > !
> > > > !
> > > > !
> > > > interface Serial0
> > > > ip unnumbered FastEthernet0
> > > > encapsulation frame-relay
> > > > no fair-queue
> > > > service-module t1 timeslots 23-24
> > > > frame-relay map ip x.x.x.x xxx broadcast
> > > > no shut
> > > > !
> > > >
> > > > interface BRI0
> > > > description Backup ISDN interface
> > > > ip address x.x.x.x x.x.x.x
> > > > encapsulation ppp
> > > > dialer idle-timeout 30
> > > > dialer string xxxxxxxxxxx
> > > > dialer load-threshold 25 outbound
> > > > dialer-group 1
> > > > isdn switch-type basic-ni
> > > > isdn spid1 xxxxxxxxxxx
> > > > no cdp enable
> > > > ppp authentication pap callin
> > > > ppp pap sent-username me password you
> > > > no shut
> > > > !
> > > > interface FastEthernet0
> > > > ip address x.x.x.x x.x.x.x
> > > > no ip route-cache
> > > > speed auto
> > > > no fair-queue
> > > > no shut
> > > > !
> > > > router eigrp 20
> > > > network x.x.x.x
> > > > !
> > > > ip classless
> > > > no ip http server
> > > > !
> > > > !
> > > > map-class dialer 64k
> > > > access-list 101 deny eigrp any any
> > > > access-list 101 permit ip any any
> > > > dialer-list 1 protocol ip list 101
> > > > !
> > > > line con 0
> > > > exec-timeout 0 0
> > > > transport input none
> > > > line aux 0
> > > > line vty 0 4
> > > > password xxx
> > > > login
> > > > !
> > > > no scheduler allocate
> > > > end
> > > >
> > > >
> > > >
> > > >
> > > > _________________________________
> > > > FAQ, list archives, and subscription info:
> > > http://www.groupstudy.com/list/cisco.html
> > > > Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
> > > >
> > >
> > >
> > > _________________________________
> > > FAQ, list archives, and subscription info:
> >http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > >
> >
> >
> >_________________________________
> >FAQ, list archives, and subscription info:
> >http://www.groupstudy.com/list/cisco.html
> >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
