Hi
Chances are pretty good that your boot proms do not recognize the newer
flash. Call TAC and order new ones, they are free plus shipping.
HTH
--
John Hardman CCNP MCSE+I
""Ken W. Alger"" <[EMAIL PROTECTED]> wrote in message
97sf8d$6eg$[EMAIL PROTECTED]">news:97sf8d$6eg$[EMAIL PROTECTED]...
> I have a 2505, IOS 10.2(6) which I am attempting to add more Flash RAM to
in
> order to run a more current IOS. I purchased an 8 MB chip, but when I
> install it and boot the router up I get the following error that doesn't
> occur with the current 4 MB chip:
>
> ERR: Invalid chip id 0x80B5(reversed: 0x1AD) detected in system flash
>
> Any ideas as to what this means as I have not encountered this one before.
>
> Thanks,
> Ken
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
