Hi ,
My network design is as follows :
I have two 2610 routers which are interconnected , on the first router
(Cisco2610) the configuration is as follows :
1) Serial0/0- Ip address 192.168.1.1
Ethernet 10.100.10.1
On the second router (cisco2620) the configurations are as follows :
2) Serial0/0 - 192.168.1.2
Ethernet - 200.100.10.1
I am able to successfully set the static route from the first router to
the second router by giving the command :
ip route 200.100.10.0 255.255.255.0 192.168.1.2
and ping the interfaces on the side of ethernet of 200.100.10.1
but when I give the command for the second router ie.
ip route 10.100.10.1 255.0.0.0 192.168.1.1 , I get an error which states
as follows :
" % Inconsistent address and mask " and I am unable to ping to
193.168.0.1
why am I getting this error and how can I correct this error .
I can sucessfully set up my routing tables dynamically using either RIP or
IGRP , but I am unable to do so statically
Will I have to change any configurations on the second router.
thanks in advance .
Navin Parwal
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
