Let me thank Greg Bensimon and Nigel Taylor for their help in identifying
what the annoyance was. The issue involved is actually policy routing
(YUCK). I had to apply a route map with the appropriate networks hosts and
set the next hop to the hub router. These configurations were done on the
spoke routers of the frame relay cloud. I then applied the policy to the
router rather than to a specific interface i.e. ip local policy route-map
blah. I can now ping every interface (THANK YOU). This lab was allocated 4
hours... I took around 14 to do this. I could have done it in half an hour
if I were aloud to use IP OSPF NETWORK command or indeed frame relay maps.
Again thanks to everyone else who helped out and I can't remember your names
(sorry!).
P.S. Greg good luck on the 19th & 20th.
Cheers
Robert McCallum
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
