Re: ADSL Splits off a 4KHz Region

[Isdianto Tanu Setijadjie - Metronet]

It means that the voice signal is using bandwidth from 0Hz (DC end of the
band) until 4kHz, and ADSL signal is using above the 4kHz (usually from
100kHz until several Mbps).

You still need a splitter at your site to connect to the ADSL modem and
telp. (this is more expensive), or you can use microfilter (only to filter
higher freq.) to connect your telp. line to ADSL line.

Hope this will help.

Isdianto

----- Original Message -----
From: "Yonkerbonk" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Friday, 09 March, 2001 08:31 AM
Subject: Re: ADSL Splits off a 4KHz Region


> I think it refers to the fact that voice is ran at the
> 3KHz or abouts spectrum. ADSL runs higher than that so
> they don't interfere with each other. That's why you
> can surf and talk on the phone at the same time. But
> you still need a splitter to send traffic from your
> phone line to either the phone or the DSL CPE.
>
> Michael
>
> --- [EMAIL PROTECTED] wrote:
> > Can someone explain the following statement to me?
> >
> > ADSL Splits off a 4 KHz region for basic telephone
> > service at the DC end of
> > the band.
> >
> > I do not understand what they mean by Splits off
> > (How)?
> > I do not understand; at the DC end of the band?
> >
> > TIA,
> >
> >
> > Jess
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
>
>
> __________________________________________________
> Do You Yahoo!?
> Get email at your own domain with Yahoo! Mail.
> http://personal.mail.yahoo.com/
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>

_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]