You can use the console ports as well. I find that much easier to deal
with. Then you don't need a telnet password configured on all the routers.
Cheerz-
Brent
CCNP, CCNA, MCSE, MCP+I
""Brian M. Green"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I am setting up a practice lab and had a question about reverse telnet.
> I am using an access server with 8 async interfaces. Am I supposed to
> connect these interfaces to the Aux ports of the other routers? I know
> the configuratin steps to take at the access server, but do I need to
> configure anything at the remote routers other than a telnet password?
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
