Phil,
Your serial would have to be a Async/Sync interface in order to use
the "physical-layer" command..
The 2500 models that support this function are the 2520-2523 and the
2524-2525. I use my 2501 for Async DDR through the use of the aux port...
HTH
Nigel..
----- Original Message -----
From: Circusnuts <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, March 12, 2001 5:57 PM
Subject: Configuring Dial on a Serial Interface
> I have (2) 2500 with RS-232's running from the Serial ports to =
> USRobotics/3Com modems, which in tern are connected to a Teltone Telco =
> simulator. I thought the hard part was over, when I finished the =
> cabling the thing out. I cannot get the very basic "first things first" =
> command to take- Physical-layer async. =20
>
> Any ideas ???=20
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]