Did you try the AUX port?
Z
>From: Groupstudy <[EMAIL PROTECTED]>
>Reply-To: Groupstudy <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: Re: Configuring Dial on a Serial Interface
>Date: Mon, 12 Mar 2001 21:09:30 -0800
>
> [ The following text is in the "iso-8859-1" character set. ]
> [ Your display is set for the "US-ASCII" character set. ]
> [ Some characters may be displayed incorrectly. ]
>
>Nigel is absolutely right. You need to use ports that are
>Synchronous/Asynchronous. You cannot turn a physically synchronous port
>into a asynchronous port by merely adding a command like you can to a combo
>port. Thus you need to get your hands on a 2520/2521/2522/2523 router to
>do
>what you want. I seem to recall reading that the 4 port interface modules
>for the 4000 series are combo ports, but I could be mistaken.
>
>
>----- Original Message -----
>From: Circusnuts <[EMAIL PROTECTED]>
>To: <[EMAIL PROTECTED]>
>Sent: Monday, March 12, 2001 2:57 PM
>Subject: Configuring Dial on a Serial Interface
>
>
> > I have (2) 2500 with RS-232's running from the Serial ports to =
> > USRobotics/3Com modems, which in tern are connected to a Teltone Telco =
> > simulator. I thought the hard part was over, when I finished the =
> > cabling the thing out. I cannot get the very basic "first things first"
>=
> > command to take- Physical-layer async. =20
> >
> > Any ideas ???=20
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>_________________________________
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
