what I did is :
configured port 1/1 on the 6506 as a trunk DOT1Q
VTP Domain test Server
and configured the 3com port 3.1 with the DOT1Q trunking as well.
I was getting traffic running from the 3com but the cisco was not receiving
until I ran the command
set port 1/1 nonegotiate
and the light turned on and everything started working but I think I created
a spanning tree loop because other switches on my test LAN lost
connectivity.
I am thinking either a VTP error or a VLAN problem.
This is why I decided to post this here to see if anyone had any
experience.
FMD
""freddy moreno"" <[EMAIL PROTECTED]> wrote in message
98m95v$a1u$[EMAIL PROTECTED]">news:98m95v$a1u$[EMAIL PROTECTED]...
> do any of you have experience connecting a 3com Corebuilder 9000 to a
Cisco
> 6506
> using Gig Trunking?
> any gotchas, special things that need to be done.
>
> please let me know than you
>
> thank you very much
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
