some 3com models include an optional uplink module which function as a
switching port... are you refering to the port?
you can use: show port capabilities {port}
correct me if i am wrong.......
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Sasha
Sent: Wednesday, March 14, 2001 5:24 PM
To: [EMAIL PROTECTED]
Subject: Full duplex and a hub
Hi ALL,
a fast Ether port on a cisco switch (2900XL)
connected to a hub (3com repeater) 10/100 port
reports auto-negotiated full-duplex, and works fine.
How can a normal hub (no buffering!) accept full-duplex?
To my undestanding this is impossible...
Am I wrong?
And, is there a simple way to check the duplex mode
of a line by some IOS-independent method?
Thanks.
Alex
==============
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
