Take a look at the following link (watch the wrap!)
http://www.cisco.com/warp/public/122/crashes_swforced_troubleshooting.html
Rick Watson
Network Engineer
OUSD(Comptroller)
703.697.5710
[EMAIL PROTECTED]
-----Original Message-----
From: Deloso, Elmer G (WPNSTA Yorktown) [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, March 14, 2001 9:59 AM
To: '[EMAIL PROTECTED]'
Subject: Router software crash
Hi, group.
Can someone explain why my 2514 keeps recycling the boot phase over and
over? Here's the output with the error in bold letters. Thanks.
Router>sh ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-D-L), Version 12.0(6), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Tue 10-Aug-99 23:52 by phanguye
Image text-base: 0x030382E0, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE
SOFT
WARE (fc1)
Router uptime is 1 minute
System restarted by error - Software forced crash, PC 0x31BDDEA
System image file is "flash:c2500-d-l.120-6.bin"
cisco 2500 (68030) processor (revision L) with 6144K/2048K bytes of memory.
Processor board ID 11372700, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
2 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2102
Elmer Deloso
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
